Package Includes:

• (2) Memphis Audio MOJO MJM812 8" 1800w Competition Car Subwoofer Sub 1 or 2 ohm
• (1) Rockville Krypton M5 8000 Watt Peak / 2000w RMS Mono 1 Ohm Car Amplifier Amp
• (1) Rockville RWK0CU 0 AWG Gauge 100% Copper Complete Amp Installation Wire Kit OFC

---

Description:

MOJO mini subwoofers received a huge upgrade for 2023 with the addition of Memphis FLEXTM technology allowing you to select between an impedance of 1O or 2O adding even more versatility to this compact powerful subwoofer. MOJO mini's still pack the same intense punch in both 6.5" and 8" versions and are a perfect addition for anyone looking to add huge MOJO bass with a smaller footprint.

Features:

• 1O or 2O FLEXTM selectable impedance
• CCAW triple voice coil (2" on MJM812 & 1.5" on MJM612)
• Vented cast aluminum basket
• Double stitched V-Groove rubber surround
• DVVC Direct Vent Voice Coil Cooling
• Light weight ultra-rigid glass fiber dustcap
• Reinforced spider
• Folded V-Groove surround increases excursion without sacrificing effective surface area

MOJO Mini Subwoofers W/ Flex

• 8" FLEXTM 1O or 2O 900/1800W

Specifications:

• Size (in): 8"
• RMS Power (w): 900
• Peak Power (w): 1800
• Sensitivity (dB): 82
• Magnet Size (Oz): 105
• Mounting Depth (in): 5.75
• Cut Out Diameter (in): 7.32
• Voice Coil Diameter (in): 2
• Warranty: 1

TS Parameters:

THIELE SMALL PARAMETERS
Resonant Frequency (fs)	44.2 Hz
Mechanical Q	5.9 Qms
Electrical Q	0.6 Qes
Total Q	0.542 Qts
Sensitivity	80.86 dB
Xmax Linear	0.49 in.
Displacement	0.03 cf.
Air volume of suspension (Vas)	0.239 cf.
Moving Mass (Mms)	159.9 g
Suspension Compliance (Cms)	0.108 mmN
Effective piston area (Sd)	211.24 SqCm
Motor Strength (Bl)	11.16 TM
VOICE COIL & MAGNET
Impedance Series	4 ohms
Impedance parallel	1 ohms
Voice coil diameter	2 in.
RMS Power	900 Watts
Peak Power	1800 Watts
Magnet weight	105 oz
Magnet diameter	6.14 in.
PHYSICAL DIMENSIONS
Mounting depth	5.75 in.
Cutout Diameter	7.32 in.
Frame Outside Diameter	8.66 in.
ENCLOSURE RECOMMENDATIONS
Single sub sealed	0.6 cf.
Dual subs Sealed	1.2 cf.
Single sub vented	1 GROSS cf.
Port dimensions

---

All About Krypton Series:

How To Install A Car Amplifier:

How To Set the Gain On Your Car Subwoofer Amplifier:

How To Improve Your Car Audio Electrical System:

What's in the Box:

• Amplifier
• 200A External fuse
• Bass Remote with clipping indicator
• Birth sheet with tested power
• Owner's manual
• Mounting Screws
• Warranty

Description:

The Krypton series of amplifiers by Rockville are engineered to have the best reliability and features. Whether you are a car audio competitor or just like to enjoy loud music. We engineered and designed these amps from the ground up to give you great sound quality and great features. You will notice the cool battery voltage display meter which looks great but also serves as a tool for you to know if your battery voltage is dropping which would affect your systems performance. We designed the amps to be able to last for many years even if you are playing them at max volume before clipping for extended periods of time.

Our favorite feature we introduced of the Krypton series is the bass remote that has a clipping indicator. This allows you to set the amp to max output before clipping on any song. This will protect your subs while you maximize SPL. What is nice about this is that you can set the gain level to max before clipping on any given song in real time! If you use a DD-1 or another tool, you are setting the gain on one song but the next song might have more headroom or might clip depending on the levels it was recorded at (this is referred to as crest factor in the engineering world).

We guarantee that this series of amplifiers will not only meet their Dyno Certified power but exceed their rated power.

Another feature we love about this is the bass equalizer. Most amps have this feature however not all bass EQ are created equal. Some bass EQ's will just clip your subs to death. Our bass EQ circuitry will boost the proper frequencies in a way that sounds good and is safe for your subs. In addition you can always use the clip indicator on the bass remote to make sure you are not sending a clipped signal to your subs. Our amplifier is meant to give you as much clean power to your subs as possible. Our voltage display allows you to make sure you are getting the proper voltage to your amp and our clip indicator on the remote will make sure you always send clean power to your subs. In addition we also guarantee the amplifier will be giving over the rated Dyno Certified so you can confidently match our amplifier with high-end subs and know what to expect!

What about sound quality and efficiency though ??
Well glad you asked. This amplifier is engineered so well that it has an extremely low signal to noise ratio which just means the sound will be super clean even at high volume levels. It also has a good efficiency rating so you don't have to draw too much power from your battery. One other thing that is important is that we engineered this to have a high common mode rejection rating (CMRR). This means that the amp has the capability to block out engine noise signals. By rejecting unwanted noises the end result is the cleanest sound quality.

Once again, Rockville has stepped up its game with the all new Krypton series. Their is no other amp like it on the market. In our opinion this is the best budget series of amps in the world. We actually enjoy this amp more then others that cost over 2 times the price.

Features:

• Rockville Krypton M5 8000 Watt Peak / 2000w Dyno-Certified RMS Mono 1 Ohm Car Amplifier Amp
• Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)
  
  • 1 Ohm: 2000 Watts x 1 Channel <1% THD+N (79% efficient)
  • 2 Ohm: 1300 Watts x 1 Channel <1% THD+N (86% efficient)
  • 4 Ohm: 780 Watts x 1 Channel <1% THD+N (89.5% efficient)
• Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc)
  
  • 1 Ohm: 8000 Watts x 1 Channel
  • 2 Ohm: 5200 Watts x 1 Channel
  • 4 Ohm: 3120 Watts x 1 Channel
• Digital Voltage Display on Amp (Accurate within 0.15V)
• Power/Protect/Clip LED Indicators on the front panel
• Power/Protect/Clip LED Indicators on Remote control
• Clip indicator on the bass remote allows you to quickly set any song to right before clipping in real time
• Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
• Low Pass Filter: 50Hz - 250Hz
• Subsonic Filter: 15Hz - 55Hz
• Fully Adjustable 12dB Bass Equalizer
• Remote Dashboard Subwoofer Control
• 8 Volt Preamp Circuitry
• Phase Control Switch
• High-Speed MOSFET Power Supply
• Optical Coupler Class "D" Technology
• Full IC-Controlled Protection Circuitry
• Mute and Delay Soft Start System
• RCA Preamp Line Output
• Status Mode LED Indicator
• Minimum THD at Rated Power: <0.1%
• S / N Ratio: >90dB
• Frequency Response: 15Hz - 250Hz
• Damping Factor: >150 @ 100Hz
• 200A External Fuse Included
• Passes the Signal Burst Test (Instant signal for full power "SPL Contest")
• Rockville engineered with a super low signal to noise ratio to give you clean sound
• Improved Bass EQ filter works well to boost the proper frequencies
• Dimensions: (W x H x L) 18.26" x 8.66" x 2.2"

---

Videos of RWK0CU:

Description:

We challenge anyone to put this wire to a resistance test against any other wire on the market with the same gauge. If our cable does not meet or exceed any other cable, even if it costs 3 times more, we will be happy to call tag the item and refund you in full. Why are we so confident ? This cable is 100% copper. You cant have a cable with more copper than 100 %. So the only way a cable would out-perform this one is if it were being advertised as a 0 AWG but they are giving you more wire than advertised. No brands selling 100 % copper cables actually do this.

We guarantee that this kit will compete with the most expensive amp kits on the market from Kicker, JL Audio, or any other top brands.

Maximum Power!

Looking for a wire kit that has 100% true specifications? A wire kit that uses 100% copper 0 gauge cable? Then look no further than the Rockville True-Spec RWK0-CU 0 Gauge Amplifier Wiring Installation Kit. This package includes everything you'll need to get your amplifier system powered-up correctly and at peak efficiency.

The power and ground cables aptly named "Mega Power Cable" are a no compromise power cable. Rockville's engineering team over-built and designed the cables using thousands of strands of only true 100% oxygen-free, silver-tinned copper strands. The use of a proprietary special twisting process reduces "surface skin impedance loss" so that Mega Power cables have zero signal and power loss, delivering full power from your battery system to your amplifier even at lengths of 20 feet! The increased current flow and higher amperage carrying capacity will increase your amplifiers efficiency and keep your amplifier running cooler. The SuperFlex outer insulating jacket jacket makes installation and cable routing simple and easy. The 100% copper stranded wire is extremely tolerant of the hostile conditions found under the hood in vehicles and compensates for vibration, heat expansion and flexibility. This flexible and well shielded wire is crucial for getting through all of the nooks and passageways within the confines of a vehicle interior.

Some manufactures use all aluminum or mix a little copper with aluminum to give their cables the appearance of a "heavy-duty" cable. But not Rockville, our True-Spec 100% oxygen free, silver tinned copper eliminates corrosion, increases current transfer x 10, and won't discolor over time.

The superior quality and materials of the Rockville 100% True-Spec amplifier installation kit is realized in the included accessories and cable workmanship. Included is a precision CNC cut full size ANL fuse housing, machined from solid brass and then 14K gold plated for superior signal transfer and complete with a matching gold plated 250-amp ANL fuse. The power cable is wrapped in 6 feet of durable nylon braided tubing to protect it from heat and chafing in the engine compartment. All installation accessories such as the ring terminals and spade connectors are nickel plated for superior signal transfer and durability.

CRYSTAL SQ AUDIO PLANAR SPEAKER CABLE

The speaker cable included in the Rockville True-Spec is also manufactured from 100% copper and woven in to a flat planner design and coated in our Super-Flex insulation so that it fits under and around your vehicles trim and carpet smoothly and without bulking up. With crystal clear sound quality these speaker cables deliver true audio fidelity from your car audio amplifier to your speakers. The 12 gauge speaker cable included in the 0 gauge kit can handle over 3000 watts of power without heating up or degrading signal quality.

CRYSTAL SQ RCA AUDIO INTERCONNECT CABLE

Designed and engineered to be the best sounding, best performing and best looking RCA cables available today. Each channel in the RCA cable is triple shielded first with dielectric internal insulators and then with a 98% coverage woven shield. All cables are manufactured of 100% oxygen free copper and feature twisted pair technology for superior noise rejection and pure sonic signal flow. The RCA plugs are shielded metal and feature a spiral cut outer ground ring with center split pin for precise and tight audio connections. The result of all this technology is noise free-noise rejection signal transfer for optimum sound quality. You will hear the difference these RCA signal transfer cables will make.

Amplifier Kit Key Features:

• 0 Gauge Power Amplifier Installation Kit
• Designed specifically for car audio systems over 1000 watts RMS to 3000 Watts
• Made from silver-tinned 100% virgin copper for a pure uninterrupted transfer of power and signal
• The solid brass gold plated ANL Fuse Holder offers ideal protection for high powered systems
• Strand Count: 4704
• BC-5W2 Compliant

Kit includes:

• 17 ft. Frosted Blue 0 gauge power wire with seamless crimp ring terminal
• 3 ft. Frosted Gray 0 gauge ground wire
• 17 ft. Blue 18 gauge remote lead wire
• 25 ft. Frosted Clear/Blue 12 gauge flat speaker wire
• 17 ft. Triple shielded twisted pair RCA cables
• One ANL Fuse Holder with 250 amp ANL fuse
• One 1/2" black rubber firewall grommet
• Two 0 gauge spade terminals
• Two black 12 gauge nickel-plated spade lugs
• Three blue 12 gauge nickel-plated spade lugs
• One black 0 gauge ring terminal
• Ten 6" black zip ties